N-CADM Corrosion Inhibitor
Chemical overview
A new mixed organic amine alcohol ester product with a hydrophilic group. Concrete with corrosion-inhibiting admixtures, the N-atom molecules adsorbed onto the surface of steel to form a dense and orderly chemical protective film, so that the corrosive electric potential shifts and decrease. Corrosion can be effectively prevented from chlorides, sulfates, calcium and magnesium ions, carbonization or stray current, prolonging the service life of reinforced concrete structures. Applicable to all types of marine engineering, hydraulic engineering, industrial and civil construction with steel corrosion requirements, construction located in saline areas, or buildings using sea-sand or low alkalinity cement materials.
This product complies with standard of JT / T 537-2004 "reinforced concrete rust inhibitor". Good corrosion resistance performance: it is mixed type rust inhibitor and excellent performance in salt water immersion and electrochemical test. Little effect on the setting time of concrete. Setting time difference of concrete with corrosion-inhibiting admixture is -60 ~+ 120min. No adverse effect on the compressive strength. Compressive strength ratio of concrete with corrosion inhibitor are over 100% at 7d and 28d. Good durability. Can be dispersed effectively in the porous structure of concrete, which improve the impermeability of concrete, anti-carbonation, anti-wet-dry cycle (90 times) and anti-freeze-thaw cycle durability greatly. Excellent adaptability. Good compatibility with various additives and no effect to the workability of concrete. Environmentally friendly and nitrite free. Stable performance. Non-toxic, non-irritating, non-radioactive, non-flammable and non-explosive.
Request form
Products you may also be interested in:
- Trimethylolpropane Trioleate
- 3-Aminopropyltriethoxysilane
- Tetra(methylethylketoxime)silane
- Sodium Hypophosphite Monohydrate
- WM-1036
- Magnesium Oxide
- Sodium Hydrosulfide
- WMZ-1 Mother Liquor
- Hydroxyethyl-Methyl Cellulose
- 3-(2-Aminomethylamino)propyltriethoxysilane
- N,N-dimethylcyclohexylamine
- Propylene Glycol
- Tripropylene Glycol Monomethyl Ether
- Flame Retardant HF-5
- Tetramethyliminobis-(propylamine)
- 3-Butenyltriethoxysilane
- Vinyltris(2-methoxyethoxy)silane
- Tetraethoxysilane
- Phenyltrimethoxysilane
- Sodium Perborate Monohydrate
Common searches
- sodium thiosulfate pentahydrate
- glycerol ester of rosin
- agricultural chemical supplier
- sodium ferrocyanide
- solvent suppliers
- plastic resin suppliers
- thiourea dioxide
- n-propyl bromide
- pharmaceutical chemical suppliers
- agricultural chemical suppliers
- petroleum additives
- corrosion inhibitor suppliers
- lithium hydroxide monohydrate
- bulk urea suppliers
- industrial chemical supplier
- sodium hypophosphite
- sodium erythorbate
- water treatment suppliers
- myristyl alcohol
- sodium bifluoride
- polyanionic cellulose
- cosmetic chemical suppliers
- lithium suppliers
- Dodecanedioic acid distributor
Wego supplies N-CADM Corrosion Inhibitor to users/customers for Construction Chemicals, Corrosion Inhibitors, Industrial Chemicals.